Concrete Anchors,Concrete Pole Anchors,Steel Stay Anchors with Bolts and Nuts

Concrete Pole Anchors,Steel Stay Anchors with Bolts and Nuts

DeShiQuan is a concrete nail manufacturer operated in China exporting to the world market. We provide our customers with top quality, innovative concrete nails and fastening products.

We can supply concrete anchors together with concrete nails, mainly hollow wall concrete anchor and stud anchors.concrete anchors include wedge anchors, sleeve anchors, large-diameter concrete anchors, lead shields, plastic anchors.

Concrete pole anchors.
Dimensions as follows:
91/91 (assuming this is the length of both L-shaped steel parts)
350mm (assuming this is the length of the actual metal bar that goes into the concrete)
2.5mm

Roofing screws with washers/nuts, complete, in the sizes

2-l/2 inch and 3 inch.
Screwed rod
M8xl000mmxdin934x4.8, mo0xlooommxdin934x4.8, ml2xlooommxdin934x4.8, l4xlooommxdin975x8.8,
l6xlooommxdin975x8.8, 20xlooommxdin 975x8.8. all sizes or set comes with two washwers and two nuts each set consists of one screwed rod and two washers, and two nut above screwed rod is zinc plated.

Wedge anchors-zinc plated
M6x50,60. -lomm and l5mm width
M8x50,65x l5mm and 20mm
Mlox65 and 80 x l5mm and 20mm widthy
All copperlook, or zinc plated

Steel Stay Anchors with Bolts and Nuts

Material- Low carbon steel
The width of the stay anchor- 38mm X 1.6mm (min)
The length of the stay anchor- 2.4m
Finishing -Painted with 2 coats of silver paint

Steel Corner Posts
Round steel corner posts with overhang
Material- Low carbon steel
The width of the corner post- 76 mm
The length of the post- 2.4m
Finishing- Painted with 2 coats of silver paint sealed at the top and perforated wire holes.

Hollow Wall Anchor is a kind of concrete anchors in the following sizes.
M4*22,M4*34,M4*40,M4*46.
The hollow wall anchor is a sleeve type hollow wall anchor designed for use in base materials such as plaster, wall board, concrete block or hollow tile.

Stud Anchor is quick & easily to install & set pulg in with hammer.
Strong holding power special designed to THREAD DIA=ANCHOR DIA=DRILL HOLE DIA.